Shop custom-fit patio heater covers, replacement parts, heat deflectors and heat shields made by Bromic, Dimplex, SunStar and Twin Eagles. Not sure what fits your heater? Use the parts finder below the products.
Dimplex DGR Accessory, Optional Low Clearance Heat Shield - X-DGRSHIELD Maximize safety and installation versatility with the X-DGRSHIELD, an optio...
View full details
SunStar 3-Position Switch Kit ReplacementThe SunStar 3-Position Switch Kit (part 147010) is a direct replacement for the High/Low/Off switch includ...
View full details
Bromic Heating Low Clearance Heat Deflector Key Features Reduces clearance: Lowers ceiling clearance requirement from 42" down to just 14". Enh...
View full details
Bromic Heater Cover For Freestanding Tungsten Heater Key Features Custom-Fit Protection: Specifically designed to fit the Bromic Tungsten Portab...
View full details
Save $32.59
Specs & Dimensions Replacement Element For Twin Eagles TEEH-3524 Electric Patio Heater - TERE2053 Model Material Width 62" Dept...
View full details
Save $25.77
Specs & Dimensions Replacement Element For Twin Eagles TEEH-2524 Electric Patio Heater - TERE2010 Model Material Width 40" Dept...
View full details
Save $5.32
Specs & Dimensions Twin Eagles Gas Patio Heater 120V AC Adapter - TEGH-AC Model Material Width 4" Depth 4" Height 2" Weight...
View full details
Bromic Heating Low Clearance Heat Deflector Key Features Reduces clearance: Lowers ceiling clearance requirement from 42" down to just 14". Enh...
View full details
Dimplex Heating - X-TGHCOVER - DGR Accessory, Optional Heater Cover Enhance the durability and protection of your Dimplex DGR Series heater with th...
View full detailsThe best patio heater cover is one made for your exact heater model. A custom-fit cover seals out rain, dust and UV without trapping moisture. Below you will also find replacement parts, heat deflectors and heat shields, with the model each one fits.
A heater left uncovered through winter collects rain, pollen, leaves and bird droppings. Over time that grime corrodes burners, clogs gas ports and fades powder-coated finishes. A good cover is a cheap way to protect an expensive heater, but only if it fits and breathes.
Universal fit heater covers are cut to suit many heaters of a similar shape, such as tall round-top propane tower heaters. They are inexpensive, but the loose fit lets wind lift the cover and rain blow underneath. Custom covers are designed specifically for one heater, so they stay put, look tidy and protect the parts that matter most. Every cover in this collection is a manufacturer-made, custom-fit cover.
Look for a heavy duty fabric with UV resistance so the cover does not crack or fade in the sun. Waterproof and water-resistant fabrics both work, as long as the cover lets moisture escape. Vinyl tarps and plastic sheeting trap condensation against metal, which is exactly what you want to avoid.
These covers are made by the heater brands themselves, so the fit is exact.
The Bromic Tungsten portable heater cover slips over the head of the freestanding Tungsten gas heater. It is made from heavy-duty, UV-resistant fabric that keeps off sun, rain, dust and debris. The Dimplex DGR heater cover is built for Dimplex DGR gas infrared heaters and goes on or off in seconds for cleaning.
Most outdoor heater replacement parts are model-specific, so match the part number before you order. If you do not see your part, send us your heater model and serial number and we will source it.
Every heater has a few parts that wear faster than the rest. Knowing them helps you diagnose a problem before you order.
Electric infrared heaters lose output as elements age, and a cracked or dark element will not glow at all. The Twin Eagles TERE2010 (40 in.) fits the 39-inch TEEH-2524 heater, and the 3,500W, 240V TERE2053 (62 in.) fits the 61-inch TEEH-3524. Both are made in the USA. Turn the power off at the breaker before swapping an element.
The SunStar switch kit is a direct replacement for the High/Low/Off switch on SunStar GLASS gas heaters. It restores two-stage control on SGL35, SGL50 and MGL35 models. For Twin Eagles TEGH48 gas heaters, the TEGH-AC 120V AC adapter ($39) lets the heater run from a standard outlet instead of batteries, which then act as backup power. Need a new controller instead of a single switch? Browse patio heater accessories.
| Part | Fits | Part number | Price |
|---|---|---|---|
| Tungsten portable head cover | Bromic Tungsten Portable | BH3030010 | $111 |
| DGR heater cover | Dimplex DGR series | X-TGHCOVER | $241.50 |
| Replacement element | Twin Eagles TEEH-2524 | TERE2010 | $189 |
| Replacement element | Twin Eagles TEEH-3524 | TERE2053 | $239 |
| 3-position switch kit | SunStar SGL35, SGL50, MGL35 | 147010 | $84 |
| 120V AC adapter | Twin Eagles TEGH48 | TEGH-AC | $39 |
| 300 series heat deflector | Bromic Tungsten and Platinum 300 gas | BH3030011 | $301 |
| 500 series heat deflector | Bromic Tungsten and Platinum 500 gas | BH3030002-1 | $345 |
| Low clearance heat shield | Dimplex DGR32WNG | X-DGRSHIELD | $189.99 |
Deflectors and shields are the parts that let a gas heater go under a covered patio. They block heat from rising into the ceiling and push more of it down to the seating area.
Bromic 300 Series Deflector
Bromic 500 Series Deflector
Bromic low clearance deflectors are dual-layer stainless steel with a black finish. Besides cutting the ceiling clearance to 14 in., they shield the heater from rain from above. The Dimplex shield lets the wall-mounted DGR32WNG gas heater fit spaces with less clearance. More Bromic mounting kits are in Bromic heater accessories, and brackets for other brands are in patio heater mounting brackets.
Cover the heater after every use once it has cooled completely, and keep it covered through the off-season. Never put a cover on a heater that is still warm or running.
Many mounted electric heaters, such as the IPX4-rated Bromic Tungsten electric range, are built to stay outside uncovered. Covers matter most for freestanding and portable gas heaters. Shopping for the rest of the patio too? See our grill covers.
Can't find your cover or part?
Send us your heater brand, model and serial number. We will confirm the right patio heater cover or part and order it for you.
Find my part Shop patio heatersYes, especially freestanding and portable gas heaters. A cover keeps out rain, dust, leaves and insects that can corrode parts or block the burner. Only cover the heater once it is completely cool.
A universal fit cover can work on a standard round-top tower heater. For mounted, portable or designer heaters, a custom cover made for your model fits better and is less likely to blow off.
It depends on the model, so always follow the installation manual and local code. For example, Bromic gas heaters need at least 96 in. from the floor. A Bromic low clearance deflector reduces the ceiling clearance to 14 in.
Find the model number on the rating plate of your heater, then match it to the part's fit list. If you are unsure, send us the model and serial number and we will confirm the part.
It depends on hours of use and conditions. Replace an electric element when it no longer glows evenly, is cracked or has visibly lost output.
Lowest price guaranteed: if you see it cheaper, we’ll beat it
The price you see is final. No hidden fees, and no sales tax except in NY.
Free shipping on orders $99+ in the continental U.S.
Talk directly to the owner—20 years’ of real expertise.
placeholder
