Challenger Coastal 76-Inch Outdoor Kitchen Grill Island w/ 22-Inch Power Burner & Delta Heat 32-Inch Gas Grill, Sear Zone, Rotisserie - 76.25 BDDG

Challenger Coastal 76-Inch Grill Island With Delta Heat 32-Inch Gas Grill, Sear Zone, Rotisserie & 22-Inch Power Burner

Key Features

• Complete Grill Island: A Challenger Designs Coastal 76.25 BDDG cabinet island paired with a Delta Heat 32-inch built-in gas grill with an infrared sear zone and rotisserie (DHBQ32RS) and a Delta Heat 22-inch built-in power burner (DHPW22).
• Powder-Coated Aluminum Cabinets: Rust-resistant aluminum construction with an exterior-grade powder coat finish, designed and built in the USA.
• 8 Cabinet Colors: Anthracite, Cappuccino, Graphite, Textured Gray Glimmer, Sandy Shore, Speckled Walnut, Textured Black or Textured White.
• 6 Countertop Finishes: Brushed Stainless Steel, or powder-coated aluminum in Copper Vein, Silver Vein, Speckled Walnut, Textured Black or White Vein.
• Shaker Doors and Drawer Fronts: Gasketed doors with 9" 304 stainless steel pulls.
• Three Storage Bays: From left to right, a double-door burner base, a center base with a drawer above a single door, and a double-door grill base.
• Full-Extension Drawer: Textured black powder-coated drawer box on full-extension slides in the center base.
• Adjustable Stainless Steel Legs: 4" 304 stainless steel legs level the island on uneven patios.
• Ships Fully Assembled: The cabinet island arrives assembled and ready for the grill and power burner to be installed.
• Delta Heat 32-Inch Grill: Welded 304 stainless steel grill with two 18-gauge stainless steel U-burners and an infrared sear zone.
• Infrared Rotisserie: 13,000 BTU infrared rotisserie burner with a two-position rotisserie and a motor rated for 40 lbs., included with the grill.
• 525 Sq. Inch Main Grilling Area: Plus a 239 sq. inch removable warming rack.
• 60,000 BTU Power Burner: A dual-ring cast brass burner for wok cooking, searing and boiling large pots.
• Removable Wok Ring and Cover: The power burner comes with a removable wok ring and a stainless steel cover.
• Natural Gas or Propane: Choose the grill and power burner in natural gas (DHBQ32RS-DN and DHPW22-N) or propane (DHBQ32RS-DL and DHPW22-L).

Challenger Coastal 76.25 BDDG Outdoor Kitchen Island

The Challenger Designs Coastal 76.25 BDDG is a 76.25" wide, 31" deep and 36.25" high outdoor kitchen island with room for both a grill and a power burner. From left to right, the layout is a burner base with double doors, a center door and drawer base, and a gas grill base with double doors. This package adds the Delta Heat 32-Inch Built-In Gas Grill With Sear Zone and Infrared Rotisserie and the Delta Heat 22-Inch Built-In Gas Power Burner.

Powder-Coated Aluminum Construction

Challenger builds the Coastal cabinets from rust-resistant aluminum and finishes them with a powder coat that the company describes as a premium exterior-grade finish made to withstand harsh external conditions. The cabinets are designed and built in the USA. The island stands on 4" adjustable 304 stainless steel legs and uses an integrated back panel and shelf system.

Cabinet and Countertop Color Options

Pick one cabinet color and one countertop finish. Every combination uses the shaker door style.

• Cabinet Colors: Anthracite, Cappuccino, Graphite, Textured Gray Glimmer, Sandy Shore, Speckled Walnut, Textured Black and Textured White.
• Powder-Coated Aluminum Countertops: Copper Vein, Silver Vein, Speckled Walnut, Textured Black and White Vein.
• Stainless Steel Countertop: Brushed Stainless Steel.

Door, Drawer and Burner Base Storage

The grill base has two doors for a 20 lb. propane tank or general storage. The center base has a drawer above a single door. The burner base has two doors below the power burner. The drawer uses a textured black powder-coated drawer box on full-extension slides.

The doors are gasketed and hang on hinges that adjust three ways: side to side, height and depth. A release at the rear of each hinge lets a door come off for moving or installation. Every door and drawer has a 9" 304 stainless steel pull.

Delta Heat 32-Inch Gas Grill With Sear Zone and Infrared Rotisserie

The Delta Heat DHBQ32RS is made in the USA from 304 stainless steel with welded seams and a double-lined hood. Hood assist springs take up the weight of the hood when you lift it, and an analog temperature gauge sits on the front.

Two 18-gauge stainless steel U-burners and an infrared sear zone make up the grilling surface, which is rated at 49,500 BTUs. Ceramic briquette trays sit between the U-burners and the stainless steel cooking grates to spread heat and shield the burners from drippings. The main grilling area is 525 sq. inches, and a removable warming rack adds 239 sq. inches.

A 13,000 BTU infrared burner at the back of the grill runs the included two-position rotisserie, which has a stainless steel motor rated for 40 lbs. The motor can mount on the left or right side of the grill.

The grill lights with a 9V electronic ignition. Interior halogen lights sit under the hood, and blue LED lights illuminate the control knobs. This package uses the stainless steel control panel version of the grill.

Delta Heat 22-Inch Power Burner

The Delta Heat DHPW22 is a 304 stainless steel built-in power burner with a 60,000 BTU dual-ring cast brass burner. Use it for stir-frying in a wok, searing in a pan or bringing a large pot to a boil next to the grill.

A removable wok ring holds round-bottom pans, a pull-out grease pan makes cleanup easier, and a stainless steel cover protects the burner when it is not in use. The power burner lights with a 9V electronic ignition and has blue LED control lighting to match the grill. Delta Heat makes it in the USA with globally sourced parts.

What Is Included

• Challenger Coastal 76.25 BDDG cabinet island with shaker doors, in your cabinet color.
• Countertop in your chosen finish.
• Drawer and 9" 304 stainless steel pulls.
• 4" adjustable 304 stainless steel legs.
• Delta Heat 32-Inch Built-In Gas Grill With Sear Zone and Infrared Rotisserie in natural gas or propane.
• Two-position rotisserie with a 40 lb. rated motor.
• Delta Heat 22-Inch Built-In Gas Power Burner in natural gas or propane, with a wok ring and stainless steel cover.

Installation, Gas and Electrical Requirements

The cabinet island ships fully assembled and ready for appliance installation. The Delta Heat grill installs into the grill opening and the power burner installs into the burner base, each hanging from the countertop.

• Grill Fit: Challenger sizes the grill base for most 32" or smaller grills, with cutouts up to 30.75" W x 22.5" D x 13.25" H (height measured with the countertop). The Delta Heat 32 needs a 30 1/2" W x 19 3/4" D x 9 1/2" H cutout.
• Power Burner Fit: The Delta Heat 22-inch power burner needs a 19 1/2" W x 20 3/4" D x 11 1/2" H cutout.
• Propane: The grill base is set up for a 20 lb. LP tank with a cutout under the grill.
• Natural Gas: The installer makes the gas plumbing access in the cabinet. Challenger notes the cabinets can be drilled with a metal hole saw for plumbing and electrical access. Gas connections to the grill and the power burner should be made by a qualified installer.
• Gas Connection: The Delta Heat grill has a 1/2" NPT female gas inlet.
• Electrical: Delta Heat specifies a 120V, 60Hz, 4A supply on a 15-amp dedicated circuit for the grill. The grill has a 5 ft. power cord with a 3-prong grounding plug for the lights, and the rotisserie motor also plugs into a grounded GFCI 120V outlet. The grill and power burner ignitions run on 9V batteries. Challenger recommends placing GFI outlets in a cabinet next to the appliance so they are easy to reset.
• Hood Clearance: Delta Heat calls for at least 3" of clearance behind the grill so the hood can open fully, and 6" at the sides in non-combustible construction. Allow for this when placing the island near a wall.
• Leveling: Set the island on a level surface and adjust the legs. Leave the protective plastic on until installation is complete.

Manufacturer Information

Challenger Designs

Click here for the Challenger Installation Instructions

Click here for the Challenger Coastal Catalog

Click here for the Challenger Warranty and Care Instructions

Delta Heat

Click here for the Delta Heat Grill Owner Manual

Click here for the Delta Heat Power Burner Owner Manual

Click here for the Delta Heat Grill Cut-Out Dimensions

Click here for the Delta Heat Power Burner Cut-Out Dimensions

Click here for the Delta Heat Grill Line Drawing

Challenger Designs Warranty

Challenger Designs gives the original purchaser a Limited Lifetime Warranty against defects in manufactured materials and workmanship under normal use, for as long as they own the cabinet. The finish is warranted against flaking, peeling, cracking or massive discoloration for three (3) years from purchase. The product must be registered with Challenger within 30 days of purchase to activate the warranty. Installation, removal and labor are not covered. Refer to the warranty document for full terms and care instructions.

Delta Heat Grill Warranty

Delta Heat warrants the stainless steel main burners and the fabricated stainless steel housing for the lifetime of the product under normal residential use. The stainless steel grates are covered for fifteen (15) years, the briquette trays and gas valves for five (5) years, and all other grill components for two (2) years from the original date of purchase. For the first one (1) year, the grill and all component parts are repaired or replaced at no cost to the original purchaser. The registration card must be returned within thirty days of purchase. Refer to the grill owner manual for full terms. Power burner warranty terms are in the power burner owner manual.