PGS E Series E27T Electric Grill Review (2026): Timer, Built-In vs Pedestal and Where It Is Allowed

PGS (Performance Grilling Systems) built its name on commercial gas grills with a one-hour timer, and the E27T is the same idea for buildings that can not have gas. It is a 30 inch stainless steel electric grill with the timer, anti-theft knobs and etched instructions of the T-Series gas grills, made for apartment communities, condos, military housing and rooftops.
We sell the E27T built-in and on a pedestal. This review covers what it is like to own: how it cooks, how the timer works, which mount fits your site, where an electric grill is actually allowed, what it costs to install and what the warranty covers. For the rest of the PGS lineup, see our PGS grill reviews.
The E27T at a glanceThe numbers that matter for a shared electric grill.
The PGS E27T is the electric grill we recommend for shared outdoor spaces where gas is not allowed. The one-hour timer, locked knobs and 540 square inches of stainless grates fix the real problems of a common-area grill, and it fits the same island cutout as the PGS S27T gas grill. The trade-offs are a 500°F top heat, slower cooking than gas, a dedicated 240 volt circuit and a one-year parts warranty for commercial use.
Is the PGS E27T a Good Electric Grill?

Yes, for the job it was built for. Most electric grills are small plug-in units sized for one family. The E27T is a full 30 inch grill head with the same footprint and cooking area as the PGS S27T gas grill, and it adds the safety hardware a property manager needs when dozens of residents share one grill.
It is not a high-heat steak grill. PGS rates it at up to 500°F, and its manual says electric grills cook more slowly than other fuels. For burgers, chicken, hot dogs and vegetables at a pool party, that is plenty.
What we like
- One-hour shutoff timer on the front panel
- Anti-theft knobs and laser-etched instructions
- 540 sq. in. of 304 stainless steel cooking grids
- Same cutout as the PGS S27T gas grill
- Plugs in, so no hardwiring
Watch out for
- Top heat of 500°F, slower than gas
- Needs a dedicated 240 volt, 30 amp circuit
- No lights, app or rotisserie
- One-year parts warranty for commercial use, no labor
PGS E27T Features: What Makes It a Commercial Grill
Three features carry over from the PGS T-Series gas grills. They are the reason this grill exists.

One-hour shutoff timer
Turn the timer dial to start the grill. When it runs out, the power shuts off, so a grill left on after a party goes off on its own.

Anti-theft knobs
The knobs lock to the grill, which cuts down on vandalism and missing parts in high-traffic common areas.

Etched panel and heat indicator
Operating steps are laser-etched into the control panel. A red indicator light comes on when the heat knob is turned up, and a side-mounted analog heat indicator shows the temperature without opening the hood.
What is inside the E-Series E27T
The owner's manual lists two 2,940 watt heating elements under two stainless rock grates, with two cooking grids on top and two cooling fans that run while the timer is on. The housing and dual-walled hood are 304 stainless steel. There is no gas valve, igniter or battery to service.

304 stainless steel cooking grids
Two grids make up a 27 by 20 inch cooking surface. PGS says they can go in a dishwasher for residential use.

Dual heating elements
Two 2,940 watt elements sit under the stainless rock grates, for 5,880 watts and up to 500°F. Each element is a replaceable part, number 327939.
E27T specifications
- ModelE27T
- Cooking surface540 sq. in., 27 x 20 in.
- Heating elementsTwo, 2,940 watts each
- Power240V, 60Hz, 24.5 amps, 5,880 watts
- Plug and cordNEMA 6-30, 6 ft.
- Top temperatureUp to 500°F
- ThermometerSide-mounted analog
- Size30 W x 27 D x 24 H in., 125 lbs
- ListingETL/Intertek certified
How the E27T Cooks, and How to Turn It On
These steps follow the PGS owner's manual. The short version is etched into the control panel.
- Start with the left knob off and open the lid.
- Set the timer. Turn the right timer dial clockwise past the time you need. The fans come on.
- Preheat on high. Turn the left knob to HIGH. The red indicator light comes on.
- Set your temperature. Once the grill is hot, turn the left knob to your cooking temperature and cook with the lid closed.
- Finish. Turn only the left knob off and let the timer run out. Never turn the timer counterclockwise, which can damage it.
Preheat and cooking tips
PGS calls for a 10 to 15 minute preheat with the lid closed, and a 30 minute burn-off on high before the first cook. Because electric grills cook more slowly than gas, use a meat thermometer rather than a timer to judge doneness. Keep the lid down between flips so the grids stay hot.

Room for a crowd
540 square inches holds about 20 burgers, the same as a 30 inch gas grill.

Simple to clean
Check the grease tray before each cook, burn off residue on high, then brush the grids. Never use a pressure washer or clean it while plugged in.
Built-In vs Pedestal: Which PGS Mount Fits Your Outdoor Kitchen?
The grill head is the same either way. The choice comes down to whether you have, or want, an outdoor kitchen island.


Building the E27T into an outdoor kitchen
PGS says the E27T installs only in an enclosure built from non-combustible materials, such as masonry, or on its pedestal. It uses the same 28 by 23 by 9.5 inch cutout as the Newport S27 gas grills, so an island built for a PGS gas grill can take the electric grill instead. PGS also shows the E27T in its 57 inch Modano island, which we sell with a T-Series gas grill.
Clearances to plan for
- Behind the grill: at least 6 inches from the back with the lid open, in non-combustible construction.
- Near combustibles: PGS recommends 24 inches on all sides, above and below.
- Overhead: do not install under unprotected combustible construction, plants, gazebos or tents.
- Shut-off: PGS recommends an emergency power shut-off outside the enclosure, within easy reach.
LAHK27 lift-assist handle

PGS lists the LAHK27 lift-assist handle ($185) as compatible with the E27T. It lowers the handle from 36 inches to 19.5 inches with the hood down, which helps wheelchair users and anyone who has trouble reaching over a grill.
Where Are Electric Grills Allowed? Balconies, Rooftops and HOAs
This is the question we get most, and the honest answer is that your local fire code and your building rules decide. Electric grills are allowed in many places where gas and charcoal are not, but not everywhere, and not every electric grill qualifies.

- NFPA 1 balcony rule: NFPA 1, as quoted by St. Johns County, Florida, bans grills on balconies, under overhangs and within 10 feet of a structure. The exception for balconies is listed electric tabletop grills of 200 square inches or less. At 540 square inches, the E27T is not a balcony tabletop grill.
- Permanent installations: the same code allows listed equipment that is permanently installed according to its listing, with a permit. That is how a built-in E27T is usually approved in a common area.
- Other cities: Madison, Wisconsin allows UL-listed electric grills on any balcony if they are used according to their listing and kept 3 feet from combustible materials. Rules really do vary by city.
- The E27T manual: outdoor use only, in a well-ventilated area, not under combustible surfaces, and not in winds over 10 mph.
In practice, the E27T belongs in ground-level common areas, patios, pool decks, courtyards and non-combustible rooftop terraces, not on a private wooden balcony. PGS also notes it helps properties meet all-electric building ordinances, but you should confirm with your local code official. Always get approval from your fire marshal or property manager before you buy. To compare the E27T with other permanent electric grills, see our guide to built-in electric grills.
Shopping for a private balcony instead? See our electric grills for balconies.
PGS E27T vs Gas Grills and Other Electric Grills
E27T vs the PGS S27T natural gas or propane grill

PGS E27T
- Power240V, 5,880 watts
- Top heat500°F
- Cooking area540 sq. in.
Best for: sites with no gas line, or where gas grills are banned.
Price $5,299
Shop the E27T
PGS S27T
- Heat45,000 BTU
- TimerOne-hour gas timer
- Cooking area540 sq. in.
Best for: clubhouse kitchens with a gas line that want more heat.
Price $4,980
Shop the S27TSame footprint, same cutout, same timer idea. Choose the S27T when a natural gas line is already run or propane grills are allowed, and the E27T when gas is not an option. Our PGS T-Series review covers every PGS gas grill with a timer.
E27T vs other electric grills we sell
For a private outdoor kitchen, the Fire Magic EL500 reaches 700°F with touchscreen and Bluetooth control, but it lacks anti-theft knobs. For a small balcony with a standard outlet, the Coyote 18 inch electric grill runs on 120 volts. The E27T is the one built for shared use. Compare them all in electric BBQ grills.
PGS E27T Price, Warranty and Parts
$5,299
The grill head for a non-combustible island.
$6,829
The grill head on a stainless pedestal with side shelves.
$185
The LAHK27 for accessible grill stations.
Budget for more than the grill
- Electrical: a dedicated 30 amp, 240 volt breaker and a NEMA 6-30 outlet within reach of the 6 foot cord, installed by a licensed electrician.
- Site work: a non-combustible island or a level pad for the pedestal.
- Extras: a grill cover, which PGS recommends, and the optional warming rack.
Running cost is low. At full power the E27T uses 5.88 kilowatt-hours per hour, so check your electric rate per kilowatt-hour for an exact figure.
What the warranty covers
For commercial and multi-user installs, PGS gives a full one-year replacement warranty on all parts, labor not included. For normal home use, the manual lists lifetime coverage on the hood, handle, housings and pedestal panels, 10 years on stainless door panels and radiant grates, and one year on electronics and other parts. Return the registration card, or the warranty does not apply.
Common replacement parts
- Heating element, part 327939 (two per grill)
- Cooking grid, part 327941, and rock grate, part 327940
- Timer, part 327934, and thermostat, part 327926
- Cooling fan, part 327923, and power cord, part 327937
PGS replacement parts are sold through AEI Corporation and PGS dealers. See our PGS grills accessories for covers, handles and parts.
Who Should Buy the PGS E27T?
A good fit
Apartment and condo amenities where gas grills are not allowed.
Rooftop terraces with non-combustible construction and a 240 volt circuit.
All-electric buildings that have no gas service.
Military housing and senior communities that want an automatic shutoff.
Look elsewhere
A private wooden balcony: choose a small listed tabletop grill.
Hard searing: the Fire Magic EL500 reaches 700°F.
A gas line already in place: the PGS S27T gives more heat.
Only a 120 volt outlet: the Coyote 18 inch electric grill.
See both E27T models in our PGS electric grill collection or the full PGS grills lineup.
PGS E27T FAQ
Is it worth getting an electric grill?
It is when gas or open flame is not allowed, or when running a gas line costs too much. An electric grill like the PGS E27T needs no tanks or gas line and shuts itself off with a timer. It cooks more slowly than gas and tops out at 500°F, so it suits burgers, chicken and vegetables more than hard searing.
What outlet does the PGS E27T need?
A 240 volt, 60Hz NEMA 6-30 outlet on a dedicated 30 amp breaker. The grill draws 24.5 amps at 5,880 watts and comes with a 6 foot cord. PGS recommends a professional electrician for the install.
How do you turn on the PGS E27T?
With the left knob off, open the lid and turn the right timer dial clockwise past the time you need. Turn the left knob to HIGH to preheat for 10 to 15 minutes, then set it to your cooking temperature. When you finish, turn the left knob off and let the timer run out.
Can the E27T go on an apartment balcony?
Usually not. Many fire codes based on NFPA 1 only allow listed electric tabletop grills of 200 square inches or less on balconies, and the E27T has 540 square inches. PGS also says not to install it under combustible surfaces. It is made for common areas, and your fire marshal has the final say.
How hot does the PGS E27T get?
Up to 500°F, from two 2,940 watt heating elements. Preheat for 10 to 15 minutes with the lid closed.
What warranty comes with the E27T?
For commercial and multi-user use, a one-year replacement warranty on all parts, labor not included. Home use gets longer coverage, including lifetime on the hood and housings. The registration card must be returned.
Planning electric grills for a property?
We help apartment communities, HOAs and hotels plan power, mounts and code approval for PGS grills. Call Matt, the owner, at 888-678-3530.
Shop PGS electric grillsShop commercial grills